Rover MPi Parts List

    Item Description   Photo Part No. Price as of 01/2007
  Sensor for Inlet Air Temperature

Green

Oxygen air sensor with green plastic top, fitted in top of manifold on TPi

Also known as IAT sensor

10001 28.74
  Water Temperature transducer

 MPi Brown

Brown plastic top sensor for fan and ECU fitted in sandwich plate below thermostat on twin point cars GTR206 10.16
  Sealing washer for temperature sensor The sealing washer should also be replaced. MDY10040  
  TPi Camshaft Sensor   NSC100760 55.35
  Crankshaft Position Sensor Crankshaft position (ckp)sensor for single and twin point cars ADU7340 65.92
  TPi Manifold Absolute Pressure Sensor Converts pressure variations in the inlet manifold and feeds ECU with information
 
MHK100600 127.64
  OXYGEN SENSOR LAMBDA UNIT (SPi & MPi)   MHK10004 81.51
  THROTTLE BODY FOR TWIN POINT INJ 48MM STANDARD THIS THROTTLE BODY REPLACES THE STANDARD PLASTIC ITEM WHICH SOMETIMES CRACKS OR DISTORTS ON TWIN POINT CARS ABF622 137.75
  THROTTLE BODY FOR TWIN POINTS 52MM WIDE(OVERSIZE) FOR TWIN POINT CARS ONLY THIS BODY IS 52MM WHICH IS OVERSIZE AND FOR USE WITH OTHER TUNING MODIFICATIONS. ABF637 142.50
  Throttle Potentiometer

TPi only

Fits on throttle body housing initiates idle speed control via the idle air valve control MLZ100090

Check MLZ100090 for cracks or damage as this part is suspect when involved in accidents.

  tps SLD100080 89.86
  Air Control Valve on Inlet Manifold 1996 on MPI also known as stepping motor--idle air control valve (IACV) Bolts on the side of the injection body housing to control engine idle speed and air flow from cold start up. The blue socket loom cap fits this unit.

THIS IS A MODIFIED UNIT AND REQUIRES 2 DIFFERENT TAPTITE SCREWS MYP100610

MLZ100090 89.96
  Taptite Screw for MLZ100090 Valve   MYP100610 0.34
  Fuel Pump   WFX100810  
  Fuel Filter GFE7059 covers all SPI models and MPI up to chassis number 169573.
From chassis number 169574 part number GFE7057 is used
GFE7059  
  Coil Pack   GCL204  
  Injector Possible Nippon Denso(not verified) MJY100460  
  Injector O-Ring Requires 2 per injector   MKG100240